Cut at the touch of a button
Functionality
This motor driven pintle winder is suitable for winding goods, such as cables, hoses, steel ropes etc. onto coils or empty drums and, simultaneously, measuring and cutting them to length by making use of adequate accessories.
Upon opening the protective door the empty drum is rolled to the place of loading in order to be wound. By push of a button, the previously opened pintle arms are first moved together and then to the appropriate height for take-over. The pintles clamp the drum. Then the drums are lifted to winding position where they can be rotated forwards or backwards manually at the operating desk. Prior to the automatic winding of the material its cutting length is adjusted on the keyboard of the Kabelmat pre-selection counter ME 40. The pre-selected length is wound during automatic winding operation and the drive stops also automatically as soon as the requested length is reached. Smooth start and stop of the drive according to the adjusted ramps. Additional creep speed function in the pre-selection counter to be adjusted once. Upon cutting and fixing the end of the winding material, the ready wound drum is lowered by push of a button, rolled out of the machine and taken away.
Basic equipment
Solid steel profile frame to be screwed on the floor
Speed control is continuously ajdustable, allowing a smooth starting
Very simple and easy material holding fixture with electric motor operated centre sleeve arms
The functions lifting/lowering as well as clamping/opening of the centre sleeves at the push of a button
Various slip-on cones for the borehole of the drum core
The winder is designed for winding heads, ring coiler heads or spool winding axles
Manually operated traversing slide designed for accessories such as length measuring units, cutting units and guide rollers
Switch cabinet integrated in the machine frame
CE conformity declaration according to machinery directive 2006/42/EG
Right to left running of the winding drive in inching operation
Roller cages before and behind the length measuring unit, easily adjustable to match the material Various models available depending on the requirements
Length measuring unit MESSBOI 40 LC / LC-MID or MESSBOI 40 B LC / LC-MID with preselection counter for winding material with outer dia meter up to 30 mm or MESSBOI 80 LC / LC-MID with preselection counter for winding material with outer diameter up to 50 mm
Recommended equipment
Automatic traversing consisting of gear motor with speed controller
Pneumatic or hydraulic operated cutting system for cutting the winding material
Roller feed in support of cutting process and in connection with pneumatic cutting device for addtional operation mode “Cut to lenght without winding process“
Coiler head for winding of coils
Conformity assessment / MID (formerly first calibration)
Further auxiliary equipment on request
