Length measuring for various winding material
Functionality
This length measuring device is used for round and flat material such as cables, pipes, hoses, ropes of all kind. It is perfectly suited for high measurement precision and low measurement tolerances. The chassis consists of a stainless steel casing in which above all the sensitive components are well protected against outer influences. The scanning of the material to be measured is ensured by two measuring tape units running against each other. The top tape unit is liftable by means of a knee lever and due to its coordinated own weight adapts itself to the thickness of the material to be measured. For registration the length, the bottom measuring unit is provided with a rotary pulse encoder.
Basic equipment
One set of inlet and outlet rollers with adjustable width
Measuring tape with manual column-type measuring wheel adjustment
Flange for a second rotary pulse encoder, provided for in the stainless steel casing
Preselection counter and rotary pulse encoder integrated in the stainless steel casing
A preselection counter LC MID with two potential-free electric contacts for controlling the fast motion / inching function of an adjustable winding drive.
Supervision of the calibrating speed with a luminous indicator
Supplementary equipment
Tripod stand for floor mounting (Height adjustable 1320 - 1620 mm) or stand for table mounting
Holding arm with inlet and outlet roller cage
Manual height locking device of the measuring wheel
Conformity assessment / MID (formerly first calibration)
