Winding big cable drums at the touch of a button
Functionality
This motor driven coil and drum pintle winders are suitable for winding goods, such as cables, tubes, hoses, steel ropes, plastic profiles etc. onto coils, spools or drums and simultaneously, measuring and cutting-to-length.
The empty drum on which the material is to be coiled, is rolled to the loading place. The previously opened centre sleeve arms are then moved together to the corresponding take-over position by the operator‘s push of a button. When the drum is clamped by the centre sleeves, the same move upwards in winding position. On the operating panel the drum can be turned forward and backward in manual operation. Prior to winding in automatic mode, the length to be cut is input with the keyboard of the Kabelmat preselection counter LC MID. In automatic winding mode, the preselected length is coiled. The drive traces the length according to the potentiometer adjustment on the operating panel and stops automatically once the length is reached. Soft start and soft stop of the drive according to the programmed ramps. The additional inching function is adjusted once only in the preselection counter. When the coiled material is cut off and the end is fixed, the drum is lowered again by the push of a button, it is rolled out of the machine and removed.
Basic equipment
Steel profile frame with two breakable steering rollers and two fixed rollers or stationary design: to be screwed on the ground
Grips for moving the machine
Manually operated traversing slide provided for the installation of additional devices such as length measuring devices, material cutters as well as an automatic traversing unit
Easy-to-handle and convenient drum loading with pintle arms driven by electric motor
The functions lifting/lowering and tightening/releasing of the pintles are activated by push of a button
Different cones for drum core drilling are insertable
Holding fixture for coiler heads (quick-change system)
The control panel with emergency switch is integrated in the base frame
Additional control panel for positioning of the pintle arms, drum driver and emergency stop function
Winding drive via geared motor with infinitely variable speed control and smooth starting of the machine
Right-left handed rotation of the winding drive within the jogger operation mode
Protective cover for UMROL (required for CE)
Recommended equipment:
Roller cages before and after the length measuring device
MESSBOI 40 LC / LC-MID length measuring device with pre-selection counter for winding material with an outer diameter of up to 40 mm or
MESSBOI 80 LC / LC-MID lenght measuring device for winding material with an outer diamter of up to 50 mm
Manually, pneumatically or hydraulically operated cutting device for cutting the winding material
Automatic traversing consisting of geared motor with rotation speed controller
Coiler head RAPID 800 SL for coil winding
Frictionally engaged drum driver with sleeve for easy loading of the drum
Further auxiliary equipment on request
