RINGROL 800

With the semi-automatic ring winder up to outer ring Ø max. 800 mm, winding materials can be wound onto rings, measured and cut off. Only the beginning of the cable is inserted into the winding core by hand, after which the ring is automatically wound up and stops after reaching the preselected length. The finished wound ring now only needs to be tied in the winding area

Coil winding made easy

Functionality

This semi-automatic coil winder allows to wind materials such as cables, tubes etc. onto coilers. Simultaneously, the material can be measured and cut to length. The mounted extension unit with automatic traversing drive is provided for the installation of a length measuring device (additional equipment), a material cutter or a feeder unit. The machine works semi-automatically, the cable catch is manually fed into the winding core. The machine winds the coil automatically and stops upon reaching the pre-selected length. Afterwards, the wound coil is pushed to the desk of a binding device (accessories) by the operator in order to be wound finally. kabelmat drum storage racks are suitable for the direct winding.

Basic equipment

  • Solid steel profile frame to be screwed on the ground

  • Protective hood is pneumatically opened and closed at a push of a button

  • Protective hood with safety switch integrated in the machine

  • Horizontal winding desk with built-in winding plate

  • Winding core pneumatically adjustable

  • Infinitely variable core diameter

  • Counter plate adjustable to coil width by push of a button

  • Pneumatically liftable counter plate

  • Traversing slide provided for additional units such as length measuring devices, material cutter, feeders and guidances

  • Automatic servo drive for traversing slides

  • Traversing speed automatically adapts to rotation speed (synchronization)

  • Winding drive by AC gear motor with infinitely variable speed control as well as speed control via potentiometer adjustable in control desk

  • Easy-to-handle control and operating centre in the working area with ermergency-stop button, provided for the installation of a pre-selection counter

  • Touch panel for the display of operating conditions and error messages as well as for the input of operating parameters

  • Electrical switch cabinet installed in the machine

  • Electrical connection via strip terminal in switch cabinet

  • Operating side: on the left (in winding direction)

Recommended equipment

  • MESSBOI 80 LC / LC-MID Length measuring device for winding material of an outer diameter of up to 80 mm, with optionally selectable central adjustment of the guide rollers

Optional

  • Pneumatically operated cutting unit for cutting the winding material

  • Material feeder allows to put the cable quickly in the winding unit

  • INKJET printer in order to print phrases or figures onto the cable

  • Binding unit for wound coil mountable at the machine

Further auxiliary equipment on request

Technical specifications

RINGROL 800 3853.000

Length
2700 mm
Width
1700 mm
Height
2100 mm
Weight
ca. 800 kg
Winding plate Ø
800 mm
Core Ø
300 - 550 mm infinitely variable
Winding height
50 - 200 mm infinitely variable
Operating height
1075 mm (+/- 25 mm)
Coil weight
max. 70 kg
Roation speed
0 - 250 min¹ (3 kW) continuously adjustable
Line speed
max. 250 m /min
Electrical connection
(CEE-connector plug)
230 / 400 V - 50 Hz
Produkt-Video

Our newsletter


Your advantages

  • First, the latest offers
  • Upcoming trade fairs and events
  • Product development & innovations
  • Latest videos and downloads