Coil winding made easy
Functionality
This semi-automatic coil winder allows to wind materials such as cables, tubes etc. onto coilers.Simultaneously, the material can be measured and cut to length. The mounted extension unit with automatic traversing drive is provided for the installation of a length measuring device (additional equipment), a material cutter or a feeder unit. The machine works semi-automatically, the cable catch is manually fed into the winding core. The machine winds the coil automatically and stops upon reaching the pre-selected length. Afterwards, the wound coil is pushed to the desk of a binding device (accessories) by the operator in order to be wound finally. Kabelmat drum storage racks are suitable for the direct winding.
Basic equipment
Painted, solid steel profile frame with two lockable steering rollers and two fixed rollers
Proctective hood with safety switch integrated in the machine
Horizontal table board equipped with integrated winding plate and core segments which can be lowered
Winding core pneumatically adjustable
Winding core diameter continuously adjustable manual, with scale
Automatic tapering of the core when lowering
Ring height adjustable by a motor
Pneumatic free lift of the winding counter plate
Traversing slide prepared for the assembly of additional devices such as length measuring devices, material cutter, feeding systems and guides
Automatically driven traversing slide consisting of geared motor with working speed control
Traversing speed automatically adapts to the winding working speed (synchronization)
Winding drive by AC-geared motor with variable working speed allowing a smooth start, working speed control adjustable via potentiometer at the operating panel
Electrical switch cabinet installed in the machine
Operating panel ergonomically integrated into the base frame
Operating side: on the left (in winding direction)
Easy-to-handle control and operating centre in the working area with ermergency-stop button, provided for the installation of a pre-selection counter
Touchpanel for the display of operating conditions and error messages as well as for the input of operating parameters
Recommended equipment
MESSBOI 40 LC / LC-MID Length measuring with pre-selection counter for winding material up to 40 mm outer diameter
Optional
Pneumatically operated cutting unit for cutting the winding material
Material feeder allows to put the cable quickly in the winding unit
INKJET Printer in order to print phrases or figures onto the cable
Binding unit for wound coil mountable at the machine
Recommended delivery systems
Unwinder: TROMTRAK, TROMROL, UMROL or PORTROL as feeding system manually driven or motorized
Cable drum storage and unwinding system LAGROL
Further auxiliary equipment on request
